Edson water heaters have been designed, manufactured and sold for well in excess of 40 years by R.Edmonds & Sons. During this time thousands of appliances have been produced and much valuable expertise gained. This expertise is now used to design hot water requirements across many varied industries, for many varied applications. From 9 litres to 10,000 litres in size with either steam, gas or electricity. Edson has the flexibility to help you design the best hot water option for your application, and manufactures it to the highest standard. Browse our site and see why EDSON is the Hot Water Specialist.

EDSON Longlife stainless steel electric hot water systems are manufactured to last. Our commercial and industrial water heaters and tanks are manufactured in Grade 2205 stainless steel and can be designed to meet your requirements. For use in hotels, hospitals, apartment buildings and many other applications, the EDSON LONGLIFE offers a productive unit life of up to 30 years and a 10 year warranty.

Domestic Hot Water Systems
Indirect Mains Pressure/Low Pressure Domestic Hot Water Calorifiers

In many instances today, the standard method of obtaining domestic hot water supply, is being augmented with the use of a solid fuel burning appliance. This appliance could be a solid fuel cooker, separate hot water circulator, an open fireplace or solar collectors. There are many types and models of modern cooking stoves available which have provisions to deliver hot water in abundance. Also with the installation of an open fireplace, provision can most times be made to incorporate a hot water back boiler to supplement an existing water heater (free vented type only). In some cases where the solid fuel appliance is of sufficient capacity, heating units such as radiators, towel rails, etc. can be installed to provide a form of house heating.

Solid Fuel Water Heaters
• FUEL Primarily designed for wood although other fuels such as briquettes may also be used.
• COPPER Features high quality all copper construction with a colourbond outer casing.
• INSULATION High Density insulation for retained heat to keep the water hot.
• MEDIUM PRESSURE Designed with a maximum operating of 75 KPA (7.5 MTR head)
• SEVEN YEAR WARRANTY

SH Model - Floor Or Ceiling Model 7.5 Metre Head
• The floor or ceiling model cistern fed unit is of all copper inner construction for long life.
• The unit is designed to operate up to head pressure of 7.5 metres, either by means of an overhead cold water feed tank or via a pressure reduction valve coupled with an open vent pipe.
• Designed for OFF PEAK operation, the 250, 315 and 400 litre units can be supplied with an optional interlocked booster element.

Dairy Hot Water Systems

Key Benefits

• 5 - 15 year Warranty - Longest available
• Tip to toe anode
• Low watt density incoloy 825 - commercial element fitted in all models
• Heavy copper construction
• Larger solenoid valve including strainer
• ISO 9002 approved